Nenergy 48V 80Ah LiFePo4 Single Battery Module- Total Usable Energy 3.8 kWh, LCD Control Panel, Advanced BMS With Current Limiting Factor, Normal Voltage 48V, Rated Capacity (5HR) 80AH, Continuous Charging 30A, Continuous Discharging 30A, Working Voltage Range 40.5V-54V, Floor Standing Or Wall Mount, Battery Cable And Wall Mount Bracket Not Included Design To Work Perfectly Hybrid Invertors Up To 5.5KVA, Retail Box, 1 Year Limited Warranty

Product Overview
The Nenergy 48V 80Ah LiFePo4 Single Battery Module with Total Usable Energy 3.8 kWh is designed for Floor Standing or Wall Mount Installations complete with integrated Battery Management System that is perfect for small to medium residential or office installations with a proven Lithium Iron Phosphate (LifePO4) chemical composition solution that offers a low internal resistance with excellent continuous high current discharge performance and great lifecycle of more than 6000 at 80% DOD. Design To Work Perfectly with Hybrid Invertors Up To 5.5KVA . This is unit is designed for single use but can also be connected in Parallel with up to 16 battery packs. Fully integrates and communicates with RS232 and RS485 with leading inverter brands (Growatt, SOLAX, LUXPower, DEYE, MUST, Voltronic, Victron, SMA, etc.)

Highlights
• Nenergy 48V 80Ah LiFePo4 Single Battery Module
•Floor Standing and Wall Mount Installation -Brackets and Cables Not Included
•Complete with integrated Battery Management System (BMS)
•Parallel Connection Up To 16 Packs With Full Communication
•Normal Voltage: 48V
•Rated Capacity (5HR):80Ah
•Total Usable 3.8 kWh
•Maximum Continuous Charging Current: 30A
•Maximum Continuous Discharging Current: 30A
• Working Voltage Range 40.5V-54V
•Built In Protection -Over-Charge, Over-Discharge, Over-Temperature
•LCD Control Panel

Specifications
•Stock Code SOL4880AH
•Description Nenergy 48V 80Ah LiFePo4 Single Battery Module
•Complete with integrated Battery Management System
•Rated Capacity (5HR): 80Ah
•Voltage: 48V
•Discharge Cut-off Voltage: 40.0V
•Maximum Continuous Charging Current: 30A
•Maximum Continuous Discharging Current: 30A
•Parallel: Parallel connection up to 16 packs with full communications
•Cells: New Li-Ion Prismatic Cells
•Design Life: -/+ 15 Years
•Cycle Life @ 1C: +/-4000 Cycles @ 100% DOD, Above 6000 cycles @ 80% DOD
•Ports: 1x RS-485 Battery Link port
•Protection: Electronic Circuit Breaker, BMS Voltage Protection, Current Limiting
•Dimensions (WxDxH): 550mm x 63mm x 450mm
•Weight: Approx. 48kg

What's in the box
1 x Nenergy 48V 80Ah LiFePo4 Single Battery Module

12 Months Warranty

Warranties Notice:
==================
A licensed electrical wireman or master electrician with current registration with the Department of Labor is required to install all inverters and batteries. Once installed, a valid electrical certificate of compliance (COC) that is particular to the installation of the backup or solar system must be granted. Installations must adhere to SANS 10142 in ALL respects. Any warranty claim that is submitted without installation images, a valid COC, and evidence that the item was installed by a trained wireman or master electrician may be denied and will render the warranty claim void.